S.O.T.A.L.B.V. "SOTA LOAD BEARING VEST"

Tomorrow I head out to assault Mount Mingus.  Its one hell of a bushwhack so I decided to pack as if assaulting a military objective.  I wanted to go light, but carry the essentials required for SOTA and survival.   I pieced together some of the gear I have had lying around in the garage.  

So I present  the Summits On The Air Load Bearing Vest, or S.O.T.A.L.B.V. for short.....

 The vest itself is built around a RAP4 vest and military web belt.  I have had both of these for a while, and they are much like the Molle Assault vests available today for the military and law enforcement crowd.

On the rear of the vest I have a Hazard 4 Forward Observer Molle SLR Camera Bag.  I have found that this little molle pouch will easily fit my KX3 and LifePo4 battery in the main compartment. 

 The zip top of the main compartment also unzips.  This additional compartment has storage for small items such as a BNC connector, Elecraft KXPD3 paddles, and a set of ear buds. 

 I have attached two small Molle pouches to the webbing on the sides of the  Hazard 4.  The first is where I have stowed my compass, my Elecraft MH3 mic, and my Power-pole battery connector for the KX3.

The opposite side pouch is an admin pouch for pens, pencils, a pocket knife, or other small misc items.

 I have added a few support straps that run over the shoulders down to the main pouch.  This helps to distribute the load over the shoulders, and the rubber hose material allows for a little shock resistance. 

I also have a drop leg pouch I use for stowing my antenna components and poncho.  That along with a 2 quart canteen, and a nalgene holder round out the pouches on my waist.  

I have included a bit of survival kit such as basic first aid items, water purification, fire starter "at least 3 ways to make fire", compass, maps, Gerber multi tool, extra HT battery, and a exterior cell battery to extend the life of my cell phone.  

I have adapted my 28 ft Jackite Pole to be used as a walking stick.  On the pole I have attached my favorite "brush killer".  For those long pesky bushwhacks.

Yea I know, overkill.  

I like this setup for those short haul summits.  I used it yesterday on my Waterrock Knob activation and was very happy with it.  It should perform well tomorrow.  

Chase me if you can!

73's and Keep Climbing!!

Rocking Waterrock Knob

Had a great hike up to Waterrock Knob today with Kendall and the slow SOTA dogs Gus and Max.  Waterrock Knob is a pretty easy summit located on the Blue Ridge Parkway, but at 6292ft it is the highest peak in the Plott Balsams and is the 16th highest mountain in the Eastern United States.

 

It was a fun day with a lot of contacts. I had to deal with a rude fellow calling CQ right on top of the chasers and myself, but it all worked out.  Thanks to all the chasers for sticking up for me on the frequency!

Date:06/Apr/2014 Summit:W4C/WM-004 (Waterrock Knob) Call Used:KK4NQQ Points: 10 Bonus: 0   Delete

Time	Call	Band	Mode	Notes
16:44z	K3VED	7MHz	SSB	Waterock
16:49z	KK4CGG	7MHz	SSB	Waterock
16:53z	KJ4EAY	7MHz	SSB	Waterock
17:04z	N8YHP	7MHz	SSB	Waterock
17:06z	WX4ET	7MHz	SSB	Waterock
17:07z	K2JB	7MHz	SSB	Waterock
17:07z	W4DOW	7MHz	SSB	Waterock
17:08z	N1EU	7MHz	SSB	Waterock
17:08z	KC9TTR	7MHz	SSB	Waterock
17:10z	KD5ZZK	7MHz	SSB	Waterock
17:13z	WA2USA	7MHz	SSB	Waterock
17:14z	NE4TN	7MHz	SSB	Waterock
17:15z	AE4FZ	7MHz	SSB	Waterock
17:17z	W0MNA	7MHz	SSB	Waterock
17:30z	K0JQZ	24MHz	SSB	Waterock
17:33z	CT1BWW	24MHz	SSB	Waterock
17:34z	WA7JTM	24MHz	SSB	Waterock
17:35z	NS7P	24MHz	SSB	Waterock
17:37z	WA6ARA	24MHz	SSB	Waterock
17:37z	EA1DFP	24MHz	SSB	Waterock
17:38z	K7JFD	24MHz	SSB	Waterock
17:38z	W7RV	24MHz	SSB	Waterock
17:39z	DJ5AV	24MHz	SSB	Waterock
17:41z	KX7L	24MHz	SSB	Waterock
17:42z	EB2CZF	24MHz	SSB	Waterock
17:43z	K9ZMD	24MHz	SSB	Waterock
17:45z	N7AMA	24MHz	SSB	Waterock
17:45z	KK5QM	24MHz	SSB	Waterock
17:48z	EA2DT	24MHz	SSB	Waterock
17:49z	N7ERU	24MHz	SSB	Waterock
17:50z	WH6EAL	24MHz	SSB	Waterock
17:51z	KEQVH	24MHz	SSB	Waterock

Check out the quick activation video at the top, and enjoy a few more pics from our day!

73's and KEEP CLIMBING!

 

GEMS SIDE KX INSTALL

Finally got my SIDE KX Panels and Cover!!

This is a great product for your KX3.

So I decided to create an install video.

ENJOY!!!

NEW ELECRAFT PX3 PANADAPTER ANNOUNCED

Just announced today and posted for immediate sale on the Elecraft website!

ELECRAFT
PX3 PANADAPTER
 

High-performance companion panadapter for the Elecraft KX3 transceiver

Full-color waterfall and spectrum displays, with fast sweep and excellent sensitivity

Simple plug-and-play operation—no PC, soundcard, software drivers or setup required

Weighs just 13 oz (0.37 kg); enclosure size: 5.4 x 3.4 x 1.7” (13.7 x 8.6 x 4.3 cm)

Portable, High-Performance Panadapter

Our new PX3 Panadapter adds a visual dimension to
signal hunting, with fast, real-time spectrum and
waterfall displays of band activity. Its small size and
weight make it ideal for travel or field use.
The PX3 is fully integrated with the Elecraft KX3,
utilizing its serial control port and RX I/Q signals * .
The panadapter tracks the KX3’s VFO frequency and
filter settings via on-screen cursors. You can point and
click on signals by rotating and tapping the PX3’s
SELECT knob.

With its very wide dynamic range and frequency span
of up to 200 kHz, the PX3 offers better performance
than most PC sound cards. It’s also one of the most
sensitive panadapters available, detecting signals
down to the noise floor of the KX3. A PC or Mac can
still be connected to the KX3 (via the PX3) for use
with logging and control programs.

Advanced Features and Signal Processing
PX3 features include multi-pass signal averaging to
pull out weak signals, peak detection to show total
activity on the band, adjustable reference level, and
amplitude range scaling. There’s also a full set of
programmable switches to access often-used settings.
The PX3 has a wide supply voltage range (8-15 V)
and low current drain (typ. 140 mA @ 13.8 V). It
includes a comprehensive manual, and is available
factory assembled or as a modular, no-soldering kit.

Planned future features include:

CW/RTTY/PSK text display 

Use of the built-in USB port with a keyboard
or flash drive

SVGA monitor output option

* The PX3 uses the KX3’s baseband RX I/Q signals. It is not
compatible with the 8.2-MHz I.F. signal from the K3.